Light Beige Padded Wool Vest

A puffer jacket costs between $40 and $135 per unit landed depending on fill type, baffle construction, and factory region. An affordable GRS recycled polyester fill channel baffle puffer from China lands at approximately $40. A premium duck down 650 fill power RDS-certified channel baffle puffer from Vietnam lands at approximately $67. A luxury white goose down 800 fill power box baffle puffer from Portugal lands at approximately $135. Fill type and baffle construction are the two primary cost drivers — they determine 60 to 70 percent of total production cost.

Fill power is the measure of down quality — specifically, the volume in cubic inches that one ounce of down occupies when fully lofted. Higher fill power means more air trapped per gram of fill, which means more warmth at lower weight. 550 fill power is entry-level commercial down. 700 to 800 fill power is premium. 900 to 1,000+ fill power is ultra-premium used in expedition gear.

Down offers superior warmth-to-weight ratio at premium fill power ratings — lighter, more compressible, and longer-lasting. However, it collapses when wet and loses insulation. Synthetic fill (PrimaLoft, recycled polyester) maintains warmth when wet, is vegan, washable, and cheaper. For accessible price points, synthetic is the default. For premium dry performance, use RDS-certified down.

Baffle construction determines how fill is contained. Stitched-through is simplest but creates cold spots. Channel baffle creates horizontal tubes — commercial standard. Box baffle creates fully separated chambers — best performance, no cold spots, adds 25–35 percent CMT. Choose based on warmth requirement and price positioning.

RDS (Responsible Down Standard) certifies that down is sourced ethically without live plucking or force feeding. It tracks the supply chain from farm to finished product. It is required for any brand making ethical claims and applies a small cost increase (×1.05–1.10 on fill cost).

Fill weight determines warmth. 40–60 g/m² for decorative quilted jackets. 80–100 g/m² for light urban puffers. 120–150 g/m² for standard winter jackets. 180–250 g/m² for extreme cold. Heavier fill increases cost directly and must be balanced with fill power and shell weight.

Lightweight nylon (20–40 GSM) is standard — allows loft and keeps weight low. Nylon ripstop adds durability. Technical nylons like Pertex are premium. Polyester is cost-down. All shells must be DWR-treated and down-proof to prevent fibre migration.

A down-proof shell has a tight weave or coating that prevents fine down fibres from escaping through the fabric. Without it, fibres will migrate to the surface and cause visible defects. Always specify down-proof fabric when using real down fill.

Yes — a fill station is required to blow fill into baffles before sealing. Not all factories have this capability. Always confirm fill station availability before placing orders. China has the strongest infrastructure for puffer production.

Down: wash at 30°C with down detergent, tumble dry low with balls to restore loft, never dry clean. Synthetic: standard gentle wash, tumble dry low. DWR must be periodically refreshed after washing. Always include care instructions on labels.

RDS for down. GRS for recycled synthetic fill. Bluesign for shell fabrics. OEKO-TEX STANDARD 100 for consumer safety. PFC-free DWR is increasingly required for EU compliance.

HS 6201 for men/unisex woven outerwear and 6202 for women. Fill type does not change classification. Knit-shell puffers use 6101/6102. Always confirm with your customs broker.