Sparkit

Magnetic Cardholder — Leather

Cases & Organisers · Top-Grain Leather

Magnetic Cardholder — Leather, flat front
Flat front
GradePer unit at 100
ColourBlack
QuantityUnder 50, a $60 development fee applies

Add 200 more to pay $14.00 / unit.

Customise

Gabi designs your changes in the Studio, then you order the finished piece. ORDER below makes it as shown.

Delivery
Lead time confirmed with your orderShipping is priced at checkout from your address.
Premium · Black × 100$16.10 / unit
ShippingAt checkout
Total, before shipping$1,610
Get a team quote

What's included at $16.10

  • Magnetic Cardholder — Leather, Premium grade (Top-Grain Leather)
  • Made to order in Black
  • Your size run, as set above
  • Replaced if anything arrives faulty

Shipping is priced at checkout from your address.

Make it yours

Your logo on the chest, a woven label, a back print, a colour from your brand book: Gabi designs the changes with you in the Studio and prices the finished piece before you order it. Your logo file goes on as you supply it.

Replaced if faultyMade to order, so no change-of-mind returns. Anything that arrives damaged or defective, we make right.
Try one firstOne unit in Premium, made like the run, through the same checkout.

A slim, flat rectangular cardholder with softly rounded corners and a solid back panel. Two layered front panels create horizontal card slots that sit flush against the body, leaving the lower section as a broad, uninterrupted leather surface. The profile is thin and uniform, with no closure or strap, sized to fit within a hand.

Specs

GradePremium, Top-Grain Leather
Main Fabric100% Leather, 800gsm
Lining100% Recycled Polyester
Internal Stiffener100% Polycarbonate
SilhouetteSlim rectangular cardholder
CareDo not wash — specialist clean only, Do not bleach, Do not tumble dry
Minimum order50 units

Similar styles

See all Cases & Organisers
Phone Pouch — Nylon

Phone Pouch — Nylon

Technical Nylon Pouch

$16.10/ unit at 100

Cable Ties / Cord Keepers — Technical

Cable Ties / Cord Keepers — Technical

Liquid Silicone Cord Keeper

$3.45/ unit at 100

Cable Organiser Roll — Leather

Cable Organiser Roll — Leather

Full-Grain Leather

$29.32/ unit at 100

Magnetic Cardholder — Technical

Magnetic Cardholder — Technical

Refined Technical Leatherette

$8.91/ unit at 100

Encyclopedia

Before 2020, a card holder that attached to a phone was almost always a sticky adhesive pocket, prone to peeling off and leaving residue.

Apple's MagSafe standard, a ring of magnets built into the iPhone's back, gave third-party accessory makers a reliable, damage-free way to attach and detach a cardholder for the first time — turning a compromise accessory into a genuinely convenient one almost overnight.

Read the story
Encyclopedia

The story of the Magnetic Cardholder — Leather

Before 2020, a card holder that attached to a phone was almost always a sticky adhesive pocket, prone to peeling off and leaving residue. Apple's MagSafe standard, a ring of magnets built into the iPhone's back, gave third-party accessory makers a reliable, damage-free way to attach and detach a cardholder for the first time — turning a compromise accessory into a genuinely convenient one almost overnight.

2020MagSafe introducedApple's magnetic ring standard replaced adhesive card pockets with a reliable snap-on attachment
Precise array matchingMagnet alignmentThe most common quality failure in magnetic cardholders is a weak or misaligned magnet array
Optional, adds thicknessRFID-blocking layerA security-conscious add-on, not a universal default, that increases both cost and card slot thickness

What MagSafe Solved

The shift from adhesive card pockets to a reliable magnetic attachment standard.

The cardholder's internal magnet array must align precisely with the phone's magnet ring to snap securely; a weak or misaligned magnet is the most common quality failure in this category.

Leather cardholders age and develop character but scuffs show over time; technical (synthetic) versions resist visible wear and are often more water-resistant.

Card capacity and whether an RFID-blocking layer is included both affect thickness and cost, with RFID blocking being a security-conscious buyer's specific ask rather than a universal default.

Questions

A leather magnetic cardholder (China, 300–500 unit run) lands around $6–12; a technical fabric version runs $4–8, with RFID-blocking adding $1–2 to either.

100 × Premium · Black

$1,610

SHOPPING BAG

(0 items)