Your logo on the chest, a woven label, a back print, a colour from your brand book: Gabi designs the changes with you in the Studio and prices the finished piece before you order it. Your logo file goes on as you supply it.
Close-upFabric and finish
Replaced if faultyMade to order, so no change-of-mind returns. Anything that arrives damaged or defective, we make right.
Try one firstOne unit in Premium, made like the run, through the same checkout.
These shorts sit at the natural waist with a two-piece waistband and belt loops, closing via a metal tack button and zip fly. The legs fall straight through the hip and upper thigh to a cropped length, ending in a raw cut edge. A back yoke and five-pocket layout complete the front and rear panels.
Specs
GradePremium, Cotton Denim
Main Fabric100% Cotton, 350gsm
pocketing100% Cotton
FitRegular
SilhouetteHigh-rise cut-off short
LengthCropped
HemStraight, raw cut edge
ClosureMetal tack button at center front waistband, metal zipper fly.
CareMachine wash at 30°C on a gentle cycle, Wash separately for the first few washes — the finish may transfer, Do not bleach
Minimum order50 units
Size guide
cm
XXS
XS
S
M
L
XL
XXL
Waist
28.5
31
33.5
36
38.5
41
43.5
Hips
40.5
43
45.5
48
50.5
53
55.5
The garment measured flat: compare it with one you own.
The jort has had more cultural lives than any garment should.
Working man's cut-off in the 1970s. Beach kid staple in the 1990s. Y2K punchline in the 2000s. Then — somehow — high fashion in 2015, and now a $250 item at luxury retail. The denim short keeps getting written off. It keeps coming back. Maybe it was never really gone.
Denim shorts cost between $24 and $50 per unit landed. An affordable five-pocket denim short from China with stone wash lands at approximately $24. A premium GOTS organic vintage-wash short from Turkey lands at around $45. Denim shorts are the lowest landed cost item in the denim family due to their lower fabric consumption (1.00m) and simpler construction than jeans.
Midweight denim at 10–12 oz (320–410 GSM) is the standard for denim shorts — it provides the structural integrity and fade potential expected by the market while being comfortable in warm weather. Lightweight (6–9 oz) is appropriate for fashion and summer-specific shorts where drape is prioritised. Heavyweight (13–15 oz) is rarely used for shorts except for workwear-adjacent positioning.
The mid-length inseam (5–6 inches) is the most commercially versatile for denim shorts, working across gender presentations and sitting at the intersection of streetwear and casual wear. Short (3–4 inch) is strongest in women's fashion. Bermuda (7–10 inch) suits smart casual and resort. Micro (1–2 inch) is high-fashion and seasonal. Always specify inseam length precisely in the tech pack.
A raw cut frayed hem is produced by cutting the fabric at the specified length without folding or stitching. The fraying develops naturally with washing and wear, or can be accelerated with a light abrasion treatment at the hem line. Specify the expected fray depth range (e.g. 5–15mm from cut edge) in the tech pack and include a QC check on fray consistency across the bulk order.
Standard factory MOQs for denim shorts are 300 to 1,000 units in China and 200 to 500 in Turkey. Through the Sparkit network MOQs start at 50 to 150 units. Denim shorts often share cutting runs with denim jeans at the same factory, which can help negotiate lower MOQs when ordering both styles simultaneously.
Denim shorts take 40 to 97 days from order to UK delivery. China is 67 to 97 days with sea freight. Turkey is 40 to 62 days. Portugal is 38 to 65 days. Shorts are slightly faster to produce than jeans because of shorter seam lengths and simpler construction, though they use the same wash house processes and timeline.
Yes — and this is recommended for first drops. Denim shorts and jeans use the same fabric, the same wash house, and the same basic five-pocket construction. A combined order reduces per-unit sampling costs, allows shared fabric yardage purchasing, and often helps negotiate lower MOQs on both styles. Always confirm that the factory has short pattern blocks ready.
Cut-off shorts are produced by cutting a finished pair of jeans above the knee — the authenticity of an existing garment's wash and wear is preserved. Manufactured shorts are produced from flat fabric using a short-specific pattern — the wash and distressing are created in the factory. Cut-offs require a base pair of jeans plus the cut and finish treatment. Manufactured shorts use standard denim-short pricing.
Prevent indigo transfer by specifying a dye fixation rinse after any wash treatment and requesting an ISO 105 colour fastness test on bulk samples. Indigo dye in denim is not chemically bonded to the yarn — it sits on the surface — which means it will transfer to other fabrics and skin, especially in the first few washes. This is especially important for shorts worn against bare skin.
A diamond crotch gusset is recommended for baggy and relaxed fit denim shorts where range of motion is important — it distributes stress at the crotch point and significantly reduces the risk of seam failure. It adds approximately $0.50–$0.80 to CMT. For slim and tailored styles the standard crotch seam is appropriate.
Yes — nettle denim works well for shorts. The lower fabric consumption (1.00m vs 1.50m for jeans) makes the per-unit cost premium smaller. A nettle denim short landed at approximately $27 is highly credible at $100–$120 retail with a zero-water agricultural story.
CMT stands for Cut, Make, and Trim — the core labour cost. For standard five-pocket denim shorts, CMT is approximately 20–25% lower than equivalent jeans due to shorter seam lengths and simpler hem construction.
Model
Close-upFabric and finish
