Your logo on the chest, a woven label, a back print, a colour from your brand book: Gabi designs the changes with you in the Studio and prices the finished piece before you order it. Your logo file goes on as you supply it.
Replaced if faultyMade to order, so no change-of-mind returns. Anything that arrives damaged or defective, we make right.
Try one firstOne unit in Premium, made like the run, through the same checkout.
A soft, unstructured leather tote bag featuring a sculptural silhouette, clean finished top edge, and dual shoulder straps.
Specs
GradePremium, Genuine Leather
Main Fabric100% Leather, 800gsm
Lining100% Leather
FitRelaxed
SilhouetteSoft unstructured tote
HemFlat base with folded gussets
ClosureConcealed or standard internal magnetic snap closure at center top.
The tote is the simplest bag shape in fashion and one of the hardest to make look expensive.
Two panels, two handles, one opening: that is the entire premise. The value comes from canvas weight, handle engineering, seam strength, and whether the bag collapses with dignity.
A tote is an open-top carry bag, usually with two handles and a rectangular, gusseted, or structured body.
Common options include cotton canvas, duck canvas, nylon canvas, leather, canvas/leather combinations, webbing, and metal hardware.. Choose based on target price, handfeel, durability, and care requirements.
Focus on reinforced handles, boxed corners, bottom panels, lining, top hem, edge binding, and bartacks at stress points. These details usually determine whether the product feels credible or cheap.
Check handle drop, body depth, laptop fit, opening width, and whether the bag is soft, structured, or collapsible. Fit should be reviewed on the body type and use case the product is designed for, not only on a flat measurement sheet.
The main cost drivers are canvas weight, leather trim, lining, hardware, bottom reinforcement, inner pockets, and edge finishing. Sampling time and rejection risk also increase cost when the fit is sensitive.
Request checks for handle pull strength, seam strength, abrasion, colour transfer, and hardware corrosion. For performance or workwear products, test under the real use condition rather than only visually.
Watch for handles tearing out, sagging bottom, weak lining, uneven top edge, and dye transfer from dark canvas or leather. These issues should be caught at fit sample, pre-production sample, and bulk inspection stages.
affordable uses unlined canvas; premium adds lining and reinforced base; luxury adds leather trim, hardware, and structured construction.
Include handle drop, bag dimensions, gusset depth, reinforcement map, pocket layout, material weight, and hardware spec. Add reference photos and tolerance notes where fit or construction is easy to misread.
bag factories with canvas and leather-trim capability are preferred over garment factories.
Use OEKO-TEX STANDARD 100 as a consumer-safety baseline where possible. Use GOTS for organic cotton, GRS for recycled polyester or nylon, RWS for responsible wool, and leather-specific or chemical compliance where relevant to the material.
spot clean canvas, condition leather trims if used, and avoid overloading beyond handle-test limits.
Model
